Details

The full aluminum control arm set for the TJ/LJ — all eight arms, front and rear. Lowers run 1.75" solid 7075-T6, uppers run 1.5" solid 7075-T6, all double-threaded on forged Rock Jock Johnny Joints (the front uppers use a steel U-bracket at the axle end). The complete aluminum set runs roughly 20–25% lighter than our steel set — about 15 lb off the Jeep, nearly all of it from swapping steel DOM tube for solid 7075 bar, with the same joints and the same strength you get from the steel arms.

Includes

• 2 aluminum front lower arms + 2 aluminum front upper arms
• 2 aluminum rear lower arms + 2 aluminum rear upper arms
• All forged Rock Jock Johnny Joints and steel front-upper U-brackets, installed
• Mounting bolts and jam nuts for all eight arms

Specs

• Lower bars — 1.75" solid 7075-T6 (front + rear)
• Upper bars — 1.5" solid 7075-T6 (front + rear)
• Joints — greaseable forged Rock Jock Johnny Joints (front uppers use a steel U-bracket at the axle end)
• Adjustable length — all eight arms
• Finish — powder coat or raw aluminum
• Lift range — 0–6 in.
• Weight — about 20–25% lighter than the steel complete set (~15 lb)
• Made in the USA
• You break it, we replace it
• Wear items (joints) — covered for 18 months

Notes

• Apply anti-seize to the aluminum-to-steel joint threads on install.
• This is the complete front + rear package — the lightest full arm set we build for the TJ/LJ.

Parts

• Forged Rock Jock Johnny Joint, right-hand — CE-9114 (all four lowers).
• Forged Rock Jock Johnny Joint, left-hand — CE-9114L (all four lowers).
• Forged Rock Jock Johnny Joint, right-hand — CE-9112NSP (rear uppers).
• Forged Rock Jock Johnny Joint, left-hand — CE-9112NSPL (front + rear uppers).
• Replacement hardware kits — CRL-J-TJLJ-FL2-HWK, CRL-J-TJLJ-RL2-HWK, CRL-J-TJLJ-FU2-HWK, CRL-J-TJLJ-RU2-HWK.

Fits

• Jeep Wrangler TJ (1997–2006)
• Jeep Wrangler Unlimited LJ (2004–2006)