Details

The complete aluminum front end for the XJ — both front lower arms and both front upper arms — the same front set as our TJ/LJ application. Lowers run 1.75" solid 7075-T6, uppers run 1.5" solid 7075-T6, all double-threaded on forged Rock Jock Johnny Joints (the front uppers use a steel U-bracket at the axle end). Solid 7075 construction takes real weight off the front of the Cherokee versus our steel arms.

Includes

• 2 assembled aluminum front lower arms (AL-J-XJ-FL2)
• 2 assembled aluminum front upper arms (AL-J-XJ-FU2)
• All forged Rock Jock Johnny Joints and steel U-brackets, installed
• Mounting bolts and jam nuts for all four arms

Specs

• Front lower bar — 1.75" solid 7075-T6 aluminum
• Front upper bar — 1.5" solid 7075-T6 aluminum
• Joints — greaseable forged Rock Jock Johnny Joints (front uppers use a steel U-bracket at the axle end)
• Adjustable length — all four arms, for front-axle alignment and caster
• Finish — powder coat or raw aluminum
• Lift range — 0–6 in.
• Made in the USA
• You break it, we replace it
• Wear items (joints) — covered for 18 months

Notes

• Apply anti-seize to the aluminum-to-steel joint threads on install.
• Front control arms only — the XJ and MJ are leaf-sprung in the rear, so this set does the entire front end.

Parts

• Forged Rock Jock Johnny Joint, right-hand — CE-9114 (front lowers).
• Forged Rock Jock Johnny Joint, left-hand — CE-9114L (front lowers).
• Forged Rock Jock Johnny Joint, left-hand — CE-9112NSPL (front uppers).
• Replacement hardware kits — CRL-J-XJMJ-FL2-HWK, CRL-J-XJMJ-FU2-HWK.

Fits

• Jeep Cherokee XJ (1984–2001)
• Jeep Comanche MJ (1986–1992)