Made in USA
Orem, Utah
Lifetime Guarantee
Unconditional
10 Colors
In-house powder coat
Fully Adjustable
0-6" of lift
3 X-Series Options
Only Core 4x4
Product Details
RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.585 in. mounting width ball with a .640 in. thru bolt hole. Finished in gold zinc plating.
| Brand | RockJock |
Reviews of Core 4x4
4.8
★
★
★
★
★
161 reviews
SC
Singer Heating and Cooling
Mar 25, 2018
★
★
★
★
★
These guys are great. You can get them on the phone for support. This important and is not always the case with other custom parts builders. Their control arms are bomb proof and offer plenty of options. You can get real genuine Currie Johnny joints without paying the price for Currie arms.
MM
Mike Martinez
Aug 25, 2025
★
★
★
★
★
Phenomenal company - very rare to come by in the automotive industry. Also very impressing. Let me start here. I got a set of yellow sway bar end links for my 19 ram DT (new body style) and let me tell you, I’m hooked. For numerous reasons. One the craftsmanship behind the product is unmatched for sure for without breaking the bank. 2ndly, they stand behind their product. Had a very minor issue and it was resolved in a blink of an eye!!! Insane. Just because of what i listed above i will forever spend my money with core 4x4! And i think you should too! I have no affiliation at all with this company besides being a consumer. I will be ordering my yellow UCAs and the rest of my rear suspension from them here shortly!
Korby on the other hand. The representative that helped me went above and beyond FAST. I hung up the phone with him, and with in no lie 3 minutes he was calling back with an answer. GREAT GREAT GREAT customer service, Korby you and core 4x4 are what give us hope in the car community! With much love and great health to you all!!
MH
mark hinz
Mar 2, 2026
★
★
★
★
★
Went above and beyond to get the parts we needed to complete our customers build for Moab Easter safari cant thank you enough for all your hard work and efforts
Thank you and look forward to working with you in the near future
A
Adam
Oct 24, 2025
★
★
★
★
★
I couldn't have been more excited for the initial unboxing of these new Core 4x4 UCA's!
They appear to be so well built and just a true quality product.
Installation was a breeze and the initial testing with the forklift appears to have given me some additional flex with less binding on the rest of the components now that the geometry is back properly aligned.
Time will tell how they hold up on my near future off-road adventures but I don't have any doubt that they are up to the task!
CL
Cade Leith
Mar 23, 2024
★
★
★
★
★
Have full upper/lower CA set on both front and rear axles on a 96 ZJ. These are the rubber bushing sets not joint sets. I have beat the hell out it in the Nevada desert for 2 years and has been great. I don’t go fast but I do articulate suspension a lot. Super solid and haven’t any issues. Just inspected the entire set recently due to some banging under it. Turns out the banging is lower rear shock bushings. Inspected each CA along the way nothing. Aside from dirt and obviously winter roads and what not still in excellent condition, bushings are solid like the day they were installed. I’ll add that I’m about tapped on a short arm at 4.25(less with settle) so the front CA’s get beat on just from that, still they’re like new. Paint is great condition, this set is red. I would definitely buy again. Another plus for me, Utah isn’t local necessarily, but it’s nice to support businesses closer to me.
TG
Travis Grimm
Mar 23, 2024
★
★
★
★
★
To start off if you're looking to upgrade your control arms definitely hit this company up. Great product, easy install of the product, with three different tiers everything is priced pretty good, I'm a sticker guy and they sent a sticker for each arm each track bar and also three extra ones so the extra are on the Jeep the advertise them for sure. If you're reading this review I highly recommend you to check their website out.
RG
Robert Van Gorder
Apr 27, 2025
★
★
★
★
★
Amazing service. Bought a track bar through Americantrucks.com and they sent it with the wrong size bushing sleeve. Korby at Core 4x4 was quick to get me the correct size and very responsive. Will definitely be using more of their stuff.
BC
Brad C
Mar 24, 2021
★
★
★
★
★
Outstanding experience! I asked Core to build me a set of custom control arms that were larger/heavier than they normally build. They gladly accepted the challenge and turned out an expertly crafted and super strong product ahead of schedule. Fit and finish are excellent. Spence and Cameron were a pleasure to work with every step of the way. And all of this for a very reasonable price. I highly recommend these guys!
PG
Paul Griffin
Feb 21, 2026
★
★
★
★
★
Great long arm kit with everything else I needed as well! They worked with me to ensure that I was getting an upgraded components kit just like I wanted. Fast shipping with some of the best packaging that I have ever seen. Nothing was scratched or missing and this kit is even more impressive than the videos or website can show. Powder coating looks great with no issues.
I would highly recommend CORE 4x4 to anyone looking for a great quality kit.
MG
Morgan Griffith
Mar 25, 2018
★
★
★
★
★
I met a couple of the Core 4x4 guys at the Salt Lake Offroad Expo and decided to try them out after noticing one of my control arm bushings was disintegrated. I called to discuss parts on Thursday and I was leaving for a trip on Saturday. These guys built my control arms and had them ready to be picked up Friday, 24 hours later. The parts seem to be great quality and they charged me nothing extra to have them painted. These guys were extremely helpful and without them my trip probably would have been cancelled. looking forward to testing out the arms on my next trip to Moab.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
