Made in USA
Orem, Utah
Lifetime Guarantee
Unconditional
10 Colors
In-house powder coat
Fully Adjustable
0-6" of lift
3 X-Series Options
Only Core 4x4
Front Lower Control Arm Hardware Kit Includes:
4 9/16” x 4” high grade bolts, 4 9/16” top lock nuts, 8 9/16” flat washers
Front Upper Control Arm Hardware Kit Includes:
4 10mm x 80mm high grade bolts, 4 10mm top lock nuts, 8 10mm flat washers
Front Track Bar Hardware Kit Includes:
1 high grade bolt of chosen size, 1 flat washer, 1 nut tab of chosen size
| Axle Side Bolt Size (Front Track Bar) | Factory or 1/2 Inch or 9/16 Inch or 5/8 Inch |
Reviews of Core 4x4
5.0
★
★
★
★
★
132 reviews
BS
Bailey Smith
Mar 23, 2025
★
★
★
★
★
Core 4x4 excels with precision and service and keeps nothing else higher in mind. Everyone I've met at the company is very honest and down to earth, 10/10 would recommend.
ST
Sal Torres
May 27, 2025
★
★
★
★
★
upper control arms look great and went on easy.. only reason I gave 4 stars and not 5 is because of a shipping issue which put my build a week behind. The issue was resolved quickly and painlessly, great customer service. Only time will tell how control arms perform but they look great and like they will go above and beyond control arm demand.
MG
Morgan Griffith
Mar 25, 2018
★
★
★
★
★
I met a couple of the Core 4x4 guys at the Salt Lake Offroad Expo and decided to try them out after noticing one of my control arm bushings was disintegrated. I called to discuss parts on Thursday and I was leaving for a trip on Saturday. These guys built my control arms and had them ready to be picked up Friday, 24 hours later. The parts seem to be great quality and they charged me nothing extra to have them painted. These guys were extremely helpful and without them my trip probably would have been cancelled. looking forward to testing out the arms on my next trip to Moab.
JT
Jay Taylor
May 27, 2025
★
★
★
★
★
Had a worn out set of rear upper control arms on my TJ. These were old rubicon express long arms. can’t buy replacements and no one makes a direct fit replacement.
Talked with Korby at core off road sent some measurements and photos and a week later new arms showed up. Packaging was perfect fit was perfect.
Would highly recommend giving these guys a call.
MH
mark hinz
Mar 2, 2026
★
★
★
★
★
Went above and beyond to get the parts we needed to complete our customers build for Moab Easter safari cant thank you enough for all your hard work and efforts
Thank you and look forward to working with you in the near future
TM
Tony Moller
Aug 25, 2025
★
★
★
★
★
Awesome parts! Support the older Jeeps! Great customer service.
PM
Paul Melancon
Aug 25, 2025
★
★
★
★
★
Ordered a control arm and track bar kit for my WJ from Core 4x4 on Monday 7/28 and received it today, Friday 8/1. Im not a state or two away, im in CT aka the other side of the country. Communication is phenominal, emails were responded too in an hour or less. Parts arrived well packed, not damaged, and are great quality for my needs. There arent many companies left that service customers as well as Core 4x4 and i wont hesitate to check them out again if i need something else. Well done!
MP
matthew patterson
May 27, 2025
★
★
★
★
★
Ive used core products for my last two jeeps and now my ram. They’re parts are the absolute best quality youll find ANYWHERE. Top quality products and A+ custom service keeps the as my go Roger for any suspension needs.
AP
Ajay Paynter
Mar 4, 2026
★
★
★
★
★
Great company, who worked with me on shipping parts to arrive in time for a show. When I explained my concern they went above and beyond to make it happen. Quality of the parts is top notch.
VK
Victor Keele
Sep 24, 2025
★
★
★
★
★
Great customer service. I got my front upper and lower control arms and hardware on Friday afternoon. It didn’t come with instructions so I called Core 4X4 and they immediately e mailed me the instructions. Also, the kit I got had the spacers missing so I called. It was late Friday by thus time but they took care of the issue first thing Monday morning and I got the spacers on Tuesday. Great company.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Axle Side Bolt Size (Front Track Bar) | Factory, 1/2 Inch, 9/16 Inch, 5/8 Inch |
