Made in USA
Orem, Utah
Lifetime Guarantee
Unconditional
10 Colors
In-house powder coat
Ships in 3 Days
From our UT facility
Fully Adjustable
0-6" of lift
3 X-Series Options
Only Core 4x4
Artec Industries is excited to announce our new JK Rear Inner Fenders. These aluminum fenders protect your rear wheel well compartment from dirt and debris but do it in style. Our proprietary process of stamping our logo not only adds an additional element of style not seen in the industry but also increases the rigidity of the whole inner fender. All this at a phenomenal price and manufactured in-house which means its Made In The USA!
Features:
- Artec JK Rear Inner Fenders
- Proprietary A-blade stamping process for increased rigidity and macdaddy status
- Lightweight 1/16 inch aluminum construction
- CNC laser cut and CNC bent for precise fit
- Can be used with Artec Nighthawk Fenders and most any other aftermarket fenders-compatible with OEM fenders
- Price is per pair - Includes passenger and drivers ide inner-fenders
- Allows use of larger tires
- Four piece construction per side for lower cost of shipping
- Pressed PEM nuts on seam between pieces for easy installation
- Shipped bare unfinished aluminum for decreased cost and ability for you to paint or powder coat to fit your style
Note:
- While all precautions are made to ensure the aluminum surface is protected, small scratches from either the raw material from the factory, the manufacturing process, or the shipping process may be present in this unfinished product. We recommend you finish this product with either painting, powder coat or another similar process and prepare the surface prior to finishing as you would normally to remove any minor blemishes.
- Mounts to OEM holes on sub-frame plus additional holes to be drilled.
- While aluminum is corrosion resistant, it is recommended to have some type of coating for long term corrosion protection.
| Vehicle | Jeep Wrangler JK / JKU (07–18) |
| Brand | Artec |
Select your lift size in Step 1 — the kit ships with the correct geometry for that height. If you’re running a non-standard setup, call us before ordering and we’ll confirm compatibility.
Death wobble is a geometry problem, not just worn parts. Cruise Series corrects caster angle and eliminates the flex points that let shimmy start. Replacing one part at a time delays the fix — this replaces the geometry.
Yes, if you’ve done a lift kit before. Full-day project. Watch the complete JT install walkthrough on our YouTube channel — most owners wrap it in a day. Any off-road shop can run it if you’d rather have it done.
Any non-wear component fails — we replace it. No mileage cap. No maintenance intervals to track. No fine print about voiding if you miss a service. Lifetime means lifetime.
Teraflex’s lifetime warranty voids if you miss a maintenance interval. MetalCloak’s actual parts warranty is 12 months — their “lifetime” language refers to their service program. No conditions here.
See It Installed
Install videos and build guides on our YouTube channel.
Watch more installs on YouTube
Reviews from Google
5.0
★
★
★
★
★
132 reviews
TR
Tim Reigies
Mar 25, 2018
★
★
★
★
★
Received the track bar I ordered, product looks extremely strong, thx core 4x4
GM
George Mar
Sep 24, 2025
★
★
★
★
★
Great company. Highly satisfied with Core 4x4 customer service. Had some bushings fall apart around 600 miles from home. Called and spoke with Korby Linscomb on Thursday, late in the afternoon. He was able to get my bushings sent across country overnight at a very reasonable rate. Had me up and running by Friday evening with enough time to enjoy the Great Smoky Mountain Jeep Invasion. Thanks Guys!
KK
Kevin Kinard
Oct 24, 2025
★
★
★
★
★
Great product, excellent customer service. I mistakingly ordered a track bar for the wrong year model and Korby helped me out by sending me the correct part that I needed no questions asked. I highly recommend.
JT
Jay Taylor
May 27, 2025
★
★
★
★
★
Had a worn out set of rear upper control arms on my TJ. These were old rubicon express long arms. can’t buy replacements and no one makes a direct fit replacement.
Talked with Korby at core off road sent some measurements and photos and a week later new arms showed up. Packaging was perfect fit was perfect.
Would highly recommend giving these guys a call.
A
Aaron
Mar 23, 2024
★
★
★
★
★
I have recently come to know Core 4x4 when I purchased a Jeep XJ and was looking for a place that had dedicated XJ suspension and components. Here is what makes them different than most other shops. All of their components are top shelf quality and they back it up if you break any of it. I was able to see their shop when I picked up an order locally and was impressed with their attention to detail and how they assemble and powder coat each part. I had an issue with a shackle and needed the threaded shaft to be shorter. I called in and talked to Kaden and he told me to come by and they would shorten it for me. When I got there, Kaden and Spencer (the owner) met me and talked about options and proceeded to make the right adjustments to fit my XJ. Told me if anything changes in the future and I need additional length, they would take care of me. So what really sets them apart from others is their Customer Service. Try calling in to any other Jeep suspension or part shop and see how they treat you. Been there - done that.
Will continue to do business with Core and their team. Getting that kind of service for just a shackle has me thinking I may need to replace my JT components with Core's. Thanks Guys for being helpful good humans!
AP
Ajay Paynter
Mar 9, 2026
★
★
★
★
★
Great company, who worked with me on shipping parts, to arrive in time for a show, when I explained my concern of possibly not getting the control arms in time. Quality is amazing on the part, affordable price for what you get, and the powdercoat is top notch, not a single issue with this product, would buy again.
MT
Ma TheMeatLoaf
Mar 23, 2024
★
★
★
★
★
Their website estimated 2 days to get my parts but actually took 11. No communication to let me know what’s going on. Parts were missing. Some days they answer questions, some they don’t. Didn’t let me know I’d have to alter stock bolts to fit their parts.
All around just seems like they don’t care.
D
David
Nov 23, 2025
★
★
★
★
★
First of I just want to say Great customer service korby Has helped me from the start and has not let me down! Reached out to him again today and he was able to warranty some parts out for me.
As far as the quality of the parts.. excellent! The build quality is great. I can definitely tell a
Difference from the cheap oem rear control arms to these and the pan hard bar.
Color, From what I can tell it’s super durable been through a few mud holes on top of the daily road grime and after a quick wipe they still pop!
Overall I recommend. Customer service is everything for me and it’s definitely there at Core 4x4.
RT
Ruby Timm
Apr 27, 2025
★
★
★
★
★
Bought a new 2019 Ram 1500. Had bad rear wheel hop since new, got all four core 4x4 control arms and it fixed the issue. Thanks
CM
Cameron Masters
Mar 24, 2023
★
★
★
★
★
Absolutely incredible family owned business. I asked to pick up my order since I’m local and they came in on a weekend to accommodate. Had to make some adjustments to parts and took the time to make sure it was perfect. Parts are incredible quality. If you have a Jeep, do not hesitate to support this local business.
Suggested Products
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Vehicle | Jeep Wrangler JK / JKU (07–18) |
| Brand | Artec |
