Product Details
This kit includes 9 components, each built and powder-coated in-house.
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Front Fixed Length End Links
View Component →
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Front Lower Adjustable Control Arms
View Component →
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Front Upper Adjustable Control Arms
View Component →
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Rear Fixed Length End Links
View Component →
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Rear Lower Adjustable Control Arms
View Component →
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Rear Upper Adjustable Control Arms
View Component →
Jeep Wrangler JK / JKU 07-18 2pc Heavy-Duty Tie Rod, Drag Link Steering Kit
View Component →
Jeep Wrangler JK / JKU 07-18 Cruise Series Front Heavy-Duty Adjustable Track Bar
View Component →
Jeep Wrangler JK / JKU 07-18 Cruise Series Rear Heavy-Duty Adjustable Track Bar
View Component →Solve Every Suspension Steering Issue with This Complete Upgrade
The Jeep Wrangler JK is an exceptional off-road platform, but its factory suspension system has well-documented weaknesses—including insufficient caster, wandering steering, following ruts in the road, and the dreaded death wobble. The Cruise Series 16-Piece Kit is designed to eliminate these issues entirely by replacing every major suspension and steering component with heavy-duty, fully adjustable upgrades that enhance handling, control, and overall drivability.
This all-inclusive kit provides everything needed to correct alignment, recenter axles, and optimize suspension geometry for lifts from 0 to 6 inches. Whether you’re daily driving or tackling the toughest trails, this kit delivers unmatched stability, precision, and durability.
Key Features and Benefits
- Eliminates common JK suspension issues – Corrects insufficient caster, eliminates wandering, prevents following ruts in the road, and significantly reduces or eliminates death wobble.
- Complete suspension steering overhaul – Replaces all major suspension and steering components with fully adjustable upgrades for precise alignment and axle positioning.
- Adjustable for lifted vehicles – Control arms and track bars adjust to accommodate lifts from 0 to 6 inches, allowing for fine-tuned caster correction, axle centering, and suspension geometry optimization.
- Build your own lift kit – Simply pair this kit with your preferred springs and shocks to create a custom lift kit that outperforms any off-the-shelf solution.
- Ultimate steering precision stability – The 2.5-ton aluminum steering kit provides improved handling, eliminates play in the steering system, and enhances overall driving confidence.
Two-Stage Powder Coating for Maximum Protection
All components undergo a two-stage powder coating process for enhanced durability and corrosion resistance:
- Zinc primer base coat for rust prevention and long-lasting protection.
- Durable top coat available in 10 color options for personalized customization.
Proudly Made in the USA
Manufactured in Orem, UT, the Cruise Series 16-Piece Kit is built with American craftsmanship and locally sourced materials, ensuring the highest quality standards in every component.
Effortless Installation
Designed for a hassle-free, bolt-on installation using factory hardware. For those dealing with rusted or stubborn bolts, we offer optional Grade 8 hardware kits separately for a smoother setup.
Vehicle Fitment: Jeep Wrangler JK 07-18 – The most complete suspension and steering upgrade available, solving common JK issues like wandering steering, death wobble, and poor alignment.
CORE Advantage: Replaces every major suspension and steering component with fully adjustable heavy-duty upgrades, delivering precision handling, improved axle positioning, and total control.
Adjustability: Designed for 0 to 6 inches of lift, allowing precise caster correction, axle re-centering, and optimized suspension geometry for a smoother, more predictable ride.
Construction: Heavy-duty steel control arms, reinforced track bars, premium sway bar end links, and a 2.5-ton aluminum steering kit to eliminate factory weaknesses and enhance durability.
Two-Stage Powder Coating: Zinc primer base and top coat available in 10 vibrant colors protect against corrosion and allow for personalized styling of your rig.
Warranty and Origin: Proudly manufactured in the United States, our product includes a lifetime warranty on all non-wear items, providing you with confidence and peace of mind in your purchase.
Built With
Front Lower control arms built with 1.875” OD 3/16” Wall DOM. Polyurethane Bushings on the fixed and adjustable ends with 1.25” x 12 TPI - 3.25” long threads.
Front Upper control arms built with 1.625” OD 3/16” Wall DOM. Welded U-bracket on the fixed end and a Polyurethane Bushing on the adjustable end with 1” x 14 TPI - 3.25” long threads.
Rear Lower control arms built with 1.875” OD 3/16” Wall DOM. Polyurethane Bushings on the fixed and adjustable ends with 1.25” x 12 TPI - 3.25” long threads.
Rear Upper control arms built with 1.625” OD 3/16” Wall DOM. Polyurethane Bushings on the fixed and adjustable ends with 1” x 14 TPI - 3.25” long threads.
Front Track Bar built with 1.5” OD 5/16” Wall DOM. Polyurethane Bushing on the fixed end and a Forged Johnny Joints on the adjustable end with 1” x 14 TPI - 2.32” long threads.
Rear Track Bar built with 1.5” OD 5/16” Wall DOM. Polyurethane Bushing on the fixed end and a Forged Johnny Joints on the adjustable end with 1” x 14 TPI - 2.32” long threads.
Front End Links built with .75” Cold Rolled Steel. Polyurethane Bushings on both fixed ends.
Rear End Links built with .75” Cold Rolled Steel. Polyurethane Bushings on both fixed ends.
Tie Rod and Drag Link made from 2" 7075 Aluminum. Tie Rod and Drag Link use Apex Chassis Forged Rod Ends.
| Make | Model | Submodel | Years |
|---|---|---|---|
| Jeep | Wrangler | 2007 - 2018 |
Each rebuild kit includes all necessary components to replace and restore wearable parts.
Construction & Materials
Front End Links built with .75” Cold Rolled Steel. Polyurethane Bushings on both fixed ends.
Front Lower control arms built with 1.875” OD 3/16” Wall DOM. Polyurethane Bushings on the fixed and adjustable ends with 1.25” x 12 TPI - 3.25” long threads.
Front Upper control arms built with 1.625” OD 3/16” Wall DOM. Welded U-bracket on the fixed end and a Polyurethane Bushing on the adjustable end with 1” x 14 TPI - 3.25” long threads.
Rear End Links built with .75” Cold Rolled Steel. Polyurethane Bushings on both fixed ends.
Rear Lower control arms built with 1.875” OD 3/16” Wall DOM. Polyurethane Bushings on the fixed and adjustable ends with 1.25” x 12 TPI - 3.25” long threads.
Rear Upper control arms built with 1.625” OD 3/16” Wall DOM. Polyurethane Bushings on the fixed and adjustable ends with 1” x 14 TPI - 3.25” long threads.
Tie Rod and Drag Link made from 2" 7075 Aluminum. Tie Rod and Drag Link use Apex Chassis Forged Rod Ends.
Front Track Bar built with 1.5” OD 5/16” Wall DOM. Polyurethane Bushing on the fixed end and a Forged Johnny Joints on the adjustable end with 1” x 14 TPI - 2.32” long threads.
Rear Track Bar built with 1.5” OD 5/16” Wall DOM. Polyurethane Bushing on the fixed end and a Forged Johnny Joints on the adjustable end with 1” x 14 TPI - 2.32” long threads.
| Vehicle | Jeep Wrangler JK / JKU (07–18) |
| Brand | CORE 4X4 |
| Color | Black or Blue or Charcoal or Green or LightGreen or Orange or Purple or Red or White or Yellow or Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Series | Cruise Series |
| Lift Size | Stock Height or Lifted 1" or Lifted 2" or Lifted 3" or Lifted 4" or Lifted 5" or Lifted 6" or Lifted 7" or Lifted 8" or Custom length or 1/2 sizes (put desired length in the Order Notes) |
| Hardware | No Hardware or Complete Kit |
| Drag Link Orientation | Factory Mounting (under the knuckle) or Drag Link Flip w/ Tapered Sleeve And Drill Bit (over the knuckle) |
| Stabilizer Clamp | Standard Clamp or Hydraulic Assist Clamp |
| Placement on Vehicle | Front Upper, Front Lower, Rear Upper, Rear Lower, Front, Rear |
| Mounting Style | Bolt-On |
Use the vehicle selector on our website to shop by your year, make, and model. On product pages, use the kit builder to select your color, series, lift height, and any add-on options, then add to cart. If you need help, call or email our team.
Standard orders typically ship within 1–3 business days of ordering. Custom color orders take approximately 5–10 business days. Because everything is built in-house, we can turn orders quickly even for custom specifications.
You can reach our team through the contact form on our website, or browse to the Contact Us page. Our team is available to answer pre-sale and technical questions before and after your purchase.
Accessories & Add-ons
FOX 2.0 IFP Stabilizer Jeep Wrangler JK
$ 229.95
Jeep JK Fox 2.0 Performance Shock Kit
$ 874.99
Apex Chassis Jeep Wrangler JK & Grand Cherokee HD Ball Joint Kit Includes: 2 Upper & 2 Lower
$ 240.00
Jeep JK/JKU Front Track Bar Relocation Bracket Bolt-On
$ 220.00
Jeep JK/JL/JT Weld On Track Bar Bracket
$ 180.00
Reviews of Core 4x4
Suggested Products
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Front Fixed Length End Links
$ 136.45
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Front Lower Adjustable Control Arms
$ 267.70
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Front Upper Adjustable Control Arms
$ 199.45
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Rear Fixed Length End Links
$ 136.45
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Rear Lower Adjustable Control Arms
$ 251.95
Jeep Wrangler JK / JKU 07-18 2pc Cruise Series Rear Upper Adjustable Control Arms
$ 251.95
Jeep Wrangler JK / JKU 07-18 2pc Heavy-Duty Tie Rod, Drag Link Steering Kit
$ 1,160.00
Jeep Wrangler JK / JKU 07-18 Cruise Series Front Heavy-Duty Adjustable Track Bar
$ 278.20
Jeep Wrangler JK / JKU 07-18 Cruise Series Rear Heavy-Duty Adjustable Track Bar
$ 293.95